Guidelines for material usage calculation: how to plan accurately the renovation budget
In the home renovation or the DEY project, Material usageCalculate It is the most fundamental and crucial step. Accurate estimates not only help you avoid the need to stop work in the middle of the renovation, but also effectively reduce waste, thereby significantly saving unnecessary expenses.
How exactly do you measure the room space?
When measuring the area, it is recommended that laser rangers or rollers be used. Size = length for rectangular rooms of the rules width. If the room is not shaped properly (e.g. L) ) is calculated by dividing it into a rectangle with multiple rules.
Why must material wear and tear be considered?
Material losses were unavoidable in actual construction. Common causes of wear and tear include:
- ♪ The edge cut: ♪ The wall side, the door, etc., requires cutting of the whole brick or floor.
- Questing: If slashed or special croquetting were used, the losses would be significantly increased.
- Unplanned breakdown: Twitches during transport and handling.
Usually recommended: floor loss of 3-5%, tiles of 5-10%, wallpaper of 10-15%.
Logical reference for calculation of common materials
- Ground brick calculation: Room size ÷ Single brick area x (1 + loss rate). For example, the bricks of 800 x 800 mm, with a single area of 0.64 square metres.
- Wall coating: The surface area is approximately 2.5 times larger than the surface area. 1 Lactose paints are usually painted 10-12 m2 (one-way).
- Floor calculation: The area of the twilight floor area. Since floors are usually sold in square metres, you need only increase the percentage of loss over the total area.